XC102560
  • Press Nut

Steel Zinc (C - S) Unified Thread Clinch Nuts

Product Details

‚ÄčThese hardened steel zinc plated clinch nuts provide load-bearing UNIFIED threads in thin metal materials of up to 80HRB hardness. For best performance we recommend using the highest shank code that is suitable for the parent material thickness.

Clinch nuts are installed into a pre-drilled or punched hole using a parallel squeezing force.

Specification

Thread SizeHole DiameterNut Body DiameterNut Body ThicknessMin. distance centre to panel edge
#2-564.226.31.84.8
#4-404.226.31.84.8
#6-324.777.11.85.6
#8-325.417.92.36.9
#10-246.358.72.37.1
#10-326.358.72.37.1
1/4-208.7511.24.38.7
1/4-288.7511.24.38.7
5/16-1810.512.75.99.7
3/8-1612.714.36.911.3

Dimensions in mm

Enquire Online

Thread Size
Shank Code
For Sheet Thickness
Part RefOrder CodeOrder MultipleQty
#2-5600.8-1.0C - S 256-0 ZIXC102560check
#2-5611.0-1.4C - S 256-1 ZIXC102561check
#2-5621.4+C - S 256-2 ZIXC102562check
#4-4000.8-1.0C - S 440-0 ZIXC104400check
#4-4011.0-1.4C - S 440-1 ZIXC104401check
#4-4021.4+C - S 440-2 ZIXC104402check
#6-3200.8-1.0C - S 632-0 ZIXC106320check
#6-3211.0-1.4C - S 632-1 ZIXC106321check
#6-3221.4+C - S 632-2 ZIXC106322check
#8-3200.8-1.0C - S 832-0 ZIXC108320check
#8-3211.0-1.4C - S 832-1 ZIXC108321check
#8-3221.4+C - S 832-2 ZIXC108322check
#10-2400.8-1.0C - S 1024-0 ZIXC1010240check
#10-2411.0-1.4C - S 1024-1 ZIXC1010241check
#10-2421.4+C - S 1024-2 ZIXC1010242check
#10-3200.8-1.0C - S 1032-0 ZIXC1010320check
#10-3211.0-1.4C - S 1032-1 ZIXC1010321check
#10-3221.4+C - S 1032-2 ZIXC1010322check
1/4-2011.4-2.3C - S 0420-1 ZIXC1004201check
1/4-2022.3+C - S 0420-2 ZIXC1004202check
1/4-2811.4+C - S 0428-1 ZIXC1004281check
5/16-1811.4-2.3C - S 0518-1 ZIXC1005181check
5/16-1822.3+C - S 0518-2 ZIXC1005182check
3/8-1612.3-3.2C - S 0616-1 ZIXC1006161check
3/8-1623.2+C - S 0616-2 ZIXC1006162check

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK

Sorry, this item is currently out of stock.
We currently hold [remaining-stock] units of this item in stock. The remainder will be put on back order.
You cannot order more of this item than we currently hold in stock.
You must order at least [min-order-qty] of this product.
You must order at least [min-order-qty] of this product. We currently hold [remaining-stock] in stock. The remainder will be put on back order.