Countersunk 2 Hole Snake Eye Self Tappers, A2 Stainless

Product Details

The 2 hole drive system, sometimes known as snake eye® or pig nose is designed for low to medium torque applications. Requires a unique 2-pin matching driver to install and remove it. See size selection table under specification tab.

Specification

Screw GaugeDriver Size
4gTH3
6gTH4
8gTH5
10gTH6
12gTH7
14gTH8

 

Diameter
Length
Order CodeOrder MultipleQty
4g (2.9mm)3/8" (9.5mm)XSTC2HA2438100
4g (2.9mm)1/2" (12mm)XSTC2HA2412100
4g (2.9mm)5/8" (16mm)XSTC2HA2458100
4g (2.9mm)3/4"(20mm)XSTC2HA2434100
4g (2.9mm)1" (25mm)XSTC2HA241100
6g (3.5mm)3/8" (9.5mm)XSTC2HA2638100
6g (3.5mm)1/2" (12mm)XSTC2HA2612100
6g (3.5mm)5/8" (16mm)XSTC2HA2658100
6g (3.5mm)3/4"(20mm)XSTC2HA2634100
6g (3.5mm)1" (25mm)XSTC2HA261100
6g (3.5mm)1 1/4" (30mm)XSTC2HA26114100
6g (3.5mm)1 1/2" (38mm)XSTC2HA26112100
8g (4.2mm)3/8" (9.5mm)XSTC2HA2838100
8g (4.2mm)1/2" (12mm)XSTC2HA2812100
8g (4.2mm)5/8" (16mm)XSTC2HA2858100
8g (4.2mm)3/4"(20mm)XSTC2HA2834100
8g (4.2mm)1" (25mm)XSTC2HA281100
8g (4.2mm)1 1/4" (30mm)XSTC2HA28114100
8g (4.2mm)1 1/2" (38mm)XSTC2HA28112100
8g (4.2mm)2" (50mm)XSTC2HA282100
10g (4.8mm)1/2" (12mm)XSTC2HA21012100
10g (4.8mm)5/8" (16mm)XSTC2HA21058100
10g (4.8mm)3/4"(20mm)XSTC2HA21034100
10g (4.8mm)1" (25mm)XSTC2HA2101100
10g (4.8mm)1 1/4" (30mm)XSTC2HA210114100
10g (4.8mm)1 1/2" (38mm)XSTC2HA210112100
10g (4.8mm)2" (50mm)XSTC2HA2102100
12g (5.5mm)1" (25mm)XSTC2HA2121100
12g (5.5mm)1 1/4" (30mm)XSTC2HA212114100
12g (5.5mm)1 1/2" (38mm)XSTC2HA212112100
12g (5.5mm)2" (50mm)XSTC2HA2122100
14g (6.3mm)5/8" (16mm)XSTC2HA21458100
14g (6.3mm)3/4"(20mm)XSTC2HA21434100
14g (6.3mm)1" (25mm)XSTC2HA2141100
14g (6.3mm)1 1/4" (30mm)XSTC2HA214114100
14g (6.3mm)1 1/2" (38mm)XSTC2HA214112100
14g (6.3mm)2" (50mm)XSTC2HA2142100

This site uses cookies. By continuing your visit, you accept their use as set out in our Cookie Policy. OK

Sorry, this item is currently out of stock.
We currently hold [remaining-stock] units of this item in stock. The remainder will be put on back order.
You cannot order more of this item than we currently hold in stock.
You must order at least [min-order-qty] of this product.
You must order at least [min-order-qty] of this product. We currently hold [remaining-stock] in stock. The remainder will be put on back order.